@article { author = {Foroughi Rad, Amin and Mohtasebi, Seyed Saeed and Ghasemi, Mahdi and Omid, Mahmoud}, title = {Nondestructive quality evaluation of Abbot Kiwifruit using electronic nose}, journal = {Iranian Journal of Biosystems Engineering}, volume = {45}, number = {1}, pages = {1-9}, year = {2014}, publisher = {دانشگاه تهران}, issn = {2008-4803}, eissn = {2423-7841}, doi = {10.22059/ijbse.2014.51285}, abstract = {Currently, nondestructive quality evaluation of various agricultural products are being developed and used. In this study, application of an electronic nose system for the quality assessment of kiwifruit (Abbot variety) is used. Electronic nose system coupled with artificial neural network (ANN) and principal component analysis (PCA) techniques was able to classify unripe, half-ripe, ripe, over-ripe and spoiled kiwifruit cultivars successfully. The two main components & , contains about 99% of variance without overlapping. The success rate for ANN was found to be 100%. The minimum and maximum mean square error was obtained for the Half-ripe and spoiled samples as 0.02523 & 0.00198, respectively. In this paper, stiffness as a quality indicator for kiwi was measured and them predicted by electronic nose data. Analysis of the results showed that the kiwifruit firmness after harvest (unripe, half-ripe, ripe and overripe) has significant difference at 5%. Using artificial neural network, the firmness prediction of Abbot variety of kiwifruit through ripening stages aroma determined with the coefficient Electronic nose system can be considered as a reliable tool for the monitoring of kiwifruits in storage conditions.}, keywords = {Gas Sensors,electronic nose,Nondestructive evaluation,artificial neural network (ANN),Principal Component Analysis (PCA)}, title_fa = {ارزیابی غیرمخرب کیفیت کیوی رقم ابوت با استفاده از بینی الکترونیکی}, abstract_fa = {امروزه روش‏های گوناگونی برای ارزیابی غیرمخرب کیفیت محصولات کشاورزی ابداع شده است و از آنها استفاده می‏شود. در تحقیق حاضر از سامانۀ بینی الکترونیکی به‏منظور ارزیابی غیرمخرب کیفیت کیوی رقم ابوت استفاده شده است. سامانۀ بینی الکترونیکی به کمک تکنیک شبکۀ عصبی مصنوعی و آنالیز مؤلفه‏های اصلی (PCA) قادر به طبقه‏بندی نارس، نیمه‌رسیده، رسیده، بیش از حد رسیده، و فساد کیوی رقم ابوت است. آنالیز مؤلفه‌های اصلی با دو مؤلفۀ  و ، 99 درصد از واریانس داده‏ها را پوشش داد و مراحل رسیدگی کیوی رقم ابوت را بدون تداخل طبقه‏بندی کرد. دقت طبقه‏بندی کل به کمک تکنیک شبکۀ عصبی مصنوعی 100 درصد محاسبه شد. کمترین و بیشترین میزان میانگین مربعات خطا به‌ترتیب در مرحلۀ نیمه‌رسیده 02523/0 و فساد کیوی رقم ابوت 00198/0 به‌دست آمد. همچنین در این تحقیق، سفتی به‌عنوان یکی از روش‏های مخرب ارزیابی رسیدگی کیفیت کیوی رقم ابوت اندازه‏گیری شد. نتایج آنالیز سفتی کیوی رقم ابوت نشان داد که بین سفتی مراحل پس از برداشت (نارس، نیمه‌رسیده، رسیده و بیش از حد رسیده) در سطح 5 درصد تفاوت معنی‏داری وجود دارد. پیش‏بینی سفتی کیوی رقم ابوت از روی بوی مراحل رسیدگی با استفاده از شبکۀ عصبی مصنوعی با ضریب 995/0  تعیین شد. سامانۀ بینی الکترونیکی مطالعه‌شده می‏تواند به‌عنوان ابزاری مطمئن برای پایش رسیدگی میوۀ کیوی در سردخانه‏ها استفاده شود.}, keywords_fa = {آنالیز مؤلفه‌های اصلی,ارزیابی غیرمخرب,بینی الکترونیکی,حسگرهای گازی,شبکۀ عصبی مصنوعی}, url = {https://ijbse.ut.ac.ir/article_51285.html}, eprint = {https://ijbse.ut.ac.ir/article_51285_c25b8437cd842d4feb1a05035f8ed711.pdf} } @article { author = {Sharifi, Mohammad and Akram, Asadollah and Rafiee, Shahin and Sabzehparvar, Majid}, title = {Planning and Scheduling Barley Production Mechanization Project Using the PERT Network: Case Study Alborz Province}, journal = {Iranian Journal of Biosystems Engineering}, volume = {45}, number = {1}, pages = {11-22}, year = {2014}, publisher = {دانشگاه تهران}, issn = {2008-4803}, eissn = {2423-7841}, doi = {10.22059/ijbse.2014.51286}, abstract = {Agricultural mechanization project must be identified in a short time frame to do a certain way; otherwise, cost is not the time to come and will also result in reduced yield. To avoid these costs in farming systems is necessary in any region that agricultural mechanization projects are and scheduling and planning as well as scientific until activities included in the project to fruition are done in the correct order and at the right time. Nature of agricultural projects - with its perform certain activities in a series of times - the closer PERT network is a network technology so PERT networks were used for planning and scheduling production mechanization barley at Alborz province. Barley for mechanized production data required by researchers from the fields of observation and questionnaire were collected by farmers. Project work break down structure diagram has been determined and it was drawn. PERT networks in the project were drawn and analyzed. The shortest time possible mechanized barley production is 228.20 days. likely to reach 99% of the product mechanized barley project completed in less than 240 days. with likely 95%, product barley project lasts 231.45 days.}, keywords = {PERT network,Planning and scheduling,Agriculture mechanization,Alborz Province}, title_fa = {برنامه‌ریزی و زمان‌بندی پروژۀ مکانیزاسیون تولید جو با استفاده از مدل شبکه‌ای پرت: مطالعۀ موردی استان البرز}, abstract_fa = {عملیات و فعالیت‏های پروژه‏های مکانیزاسیون کشاورزی می‌بایست در بازۀ زمانی کوتاه و مشخص و با ترتیب معین انجام گیرد؛ در غیر این صورت هزینه‏های به موقع انجام‌نشدن عملیات پیش می‌آید و به کاهش عملکرد محصول نیز می‌انجامد. برای جلوگیری از این هزینه‏ها در سامانه‏های کشاورزی در هر منطقه زمان‏بندی و برنامه‏ریزی مناسب وعلمی برای پروژه‏های مکانیزاسیون کشاورزی ضروری است تا فعالیت‏های موجود برای به‌ثمر‌رسیدن پروژه به‌ترتیبی صحیح و در زمان مناسبی انجام گیرند. ماهیت پروژه‏های کشاورزی ـ‌ازنظرانجام یک‌سری فعالیت‏های قطعی در زمان‌های احتمالی‌ـ در بین فنون شبکه‏ای به شبکه‏های پرت (PERT) نزدیک‏تر است. ازاین‌رو از شبکه‏های پرت برای برنامه‏ریزی و زمان‌بندی پروژۀ مکانیزاسیون تولید جو در استان البرز استفاده شد. به‌منظور تولید مکانیزۀ محصول جو اطلاعات و داده‏های لازم از طریق مشاهدۀ پژوهشگر از مزارع نمونه و تکمیل پرسش‌نامه‌ توسط کشاورزان منطقه جمع‌آوری شد. فعالیت‏های پروژه‏ تعیین گردید و نمودار ساختار شکست (WBS) آن نیز ترسیم شد. در‌پایان، شبکۀ پرت پروژه ترسیم و تجزیه و تحلیل شد. کوتاه‌ترین زمان ممکن برای تولید مکانیزه جو 20/228 روز است. با احتمال 99 درصد پروژۀ تولید مکانیزۀ جو در کمتر از 240 روز (دورۀ کشت جو) تمام می‌شود. با احتمال 95 درصد مدت پروژۀ تولید جو 45/231 روز است. نتایج نشان داد که مدل شبکۀ پرت، توانایی پاسخ‌گویی به هر نوع پرسش آماری در خصوص پروژه را دارد و هم‌چنین دید روشنی برای مدیر پروژه به‌منظور اتخاذ تصمیمات به موقع فراهم می‏آورد تا در مرحلۀ اجرا و عمل، طبق طرح‌ریزی و زمان‌بندی پروژه پیش رود و بتواند محصول را در زمان مطلوب به‌صورت مکانیزه و با بهره‏وری بالا تولید کند.}, keywords_fa = {استان البرز,برنامه‏ریزی و زمان‌بندی,شبکۀ پرت,مکانیزاسیون کشاورزی}, url = {https://ijbse.ut.ac.ir/article_51286.html}, eprint = {https://ijbse.ut.ac.ir/article_51286_80b92f4119ff2f7a031fc827dc6e61a4.pdf} } @article { author = {Bahrami, Akbar and Peighambardoust, Seyed Hadi and Golshan Tafti, Abolfazl}, title = {Acid production, acid and bile resistance of lactobacillus strains isolated from traditional sourdoughs}, journal = {Iranian Journal of Biosystems Engineering}, volume = {45}, number = {1}, pages = {23-30}, year = {2014}, publisher = {دانشگاه تهران}, issn = {2008-4803}, eissn = {2423-7841}, doi = {10.22059/ijbse.2014.51287}, abstract = {The study of biochemical characteristics and metabolic activity of Lactobacilli is necessary for selecting strains to be used as starter cultures for bread production. In this study, biochemical characteristics, acidification and probiotic properties of Lactobacillus strains (Lactobacillus plantarum, L. curvatus, L. paralimentarius) isolated from traditional sourdoughs were evaluated. All three Lactobacillus strains showed growth at 15ºC and different levels of NaCl (2, 4, 6.5%) and pH (4.4, 9.6). Lactobacillus plantarum was capable of growing at 45°C. The Lactobacillus strains had capacity to ferment a large spectrum of carbohydrates. Lactobacillus plantarum and Lactobacillus curvatus was able to ferment pentoses (xylose and arabinose). Lactobacillus curvatus and Lactobacillus paralimentarius did not ferment rhamnose. The lactobacillus strains showed a proper acidifying ability after 9 h of incubation at 30°C, with pH values between 4.5 and 4.9. The results showed that Lactobacillus plantarum and Lactobacillus paralimentarius have potential probiotic value according to acid and bile tolerance tests.}, keywords = {Acidic Resistance,Bile Resistance,Sugar Fermentation,acidification}, title_fa = {توانایی تولید اسید و تحمل به اسید و نمک‏های صفراوی در لاکتوباسیل‏های جدا‌شده از خمیرترش‏های سنتی}, abstract_fa = {بررسی ویژگی‏های بیوشیمیایی و فعالیت متابولیکی باکتری‏های لاکتوباسیل به‌منظور انتخاب آن‏ها به‏عنوان کشت‏های آغازگر در تولید نان ضروری است. در این تحقیق، ویژگی‏های بیوشیمیایی، تولید اسیدی‏، و خواص پروبیوتیکی (مقاومت به اسید و نمک‏های صفراوی) لاکتوباسیل‏های جدا‌شده از خمیرترش‏های سنتی (پلانتاروم، کورواتوس، و پارالیمنتاریوس) ارزیابی شد. هر سه سویۀ لاکتوباسیل توانایی رشد در دمای 15 درجۀ سلسیوس و غلظت‏های گوناگون نمک (2، 4، و 5/6 درصد) و pH (4/4 و 6/9) را داشتند. لاکتوباسیلوس پلانتاروم در دمای 45 درجۀ سلسیوس نیز رشد کرد. سویه‏های لاکتوباسیل توانستند طیف وسیعی از کربوهیدرات‏ها را تخمیر کنند. لاکتوباسیل‏های پلانتاروم و کورواتوس قندهای (پنتوز، زیلوز، آرابینوز) را نیز تخمیر کردند. لاکتوباسیلوس کورواتوس و لاکتوباسیلوس پارالیمنتاریوس توانایی تخمیر قند رامنوز را نداشتند. لاکتوباسیل‏های پلانتاروم، کورواتوس، و پارالیمنتاریوس خاصیت اسیدی‏کردن مناسبی داشتند و pH محیط را بعد از 9 ساعت گرمخانه‏گذاری در دمای 30 درجۀ سلسیوس به 9/4-5/4 کاهش دادند. آزمون‏های تحمل به اسید و نمک‏های صفراوی نشان داد که لاکتوباسیل‏های پلانتاروم و پارالیمنتاریوس پتانسیل پروبیوتیکی دارند.}, keywords_fa = {اسیدی‌کردن,تخمیر قندی,مقاومت اسیدی,مقاومت صفراوی}, url = {https://ijbse.ut.ac.ir/article_51287.html}, eprint = {https://ijbse.ut.ac.ir/article_51287_79da367e172d2320faed351cade7f8a4.pdf} } @article { author = {Movahed, Sara and Ahmadi Chenarbon, Hossein and Vafaie, Mehrmah}, title = {Effect of guar and carboxy methyl cellulose gums on chemical, rheological, organoleptic and staling properties of Chapatti bread}, journal = {Iranian Journal of Biosystems Engineering}, volume = {45}, number = {1}, pages = {31-36}, year = {2014}, publisher = {دانشگاه تهران}, issn = {2008-4803}, eissn = {2423-7841}, doi = {10.22059/ijbse.2014.51288}, abstract = {Chapatti is high consuming bread in the SouthEast countries of Asia that in fresh form has a tender texture but within a few days of storage, becomes inflexible. In this research, the effects of guar and CMC gums at two levels of 0.25 and 0.5% on quality of chapatti bread were investigated. Based on results, gum addition in different levels increased moisture and ash contends and improved rheological properties such as water absorption, dough development time, dough resistance, dough softening and Farinograph quality as well as organoleptic properties including taste, color of crust, chewiness, texture, baking uniformity, breakage and stretch of crust and symmetry compared to control sample. Also properties such as resistance to stretch, ability to stretch, (resistance stretch / ability to stretch) and staling rate of samples were decreased with gum addition and the samples with guar gum at concentration of 0.5% giving the best results.}, keywords = {Chapatti bread,Guar,Carboxy Metyhyl Cellulose,Rheological properties,organoleptic properties}, title_fa = {تأثیر صمغ‌های گوار و کربوکسی‌متیل سلولز بر ویژگی‌های شیمیایی، رئولوژیکی، ارگانولپتیکی، و بیاتی نان چاپاتی}, abstract_fa = {نان چاپاتی از پرمصرف‌ترین نان‌های کشورهای جنوب شرق آسیاست که به شکل تازه، بافتی نرم دارد، اما طی نگهداری کوتاه‌مدت، بافت آن سفت و بدون انعطاف می‌گردد. در این تحقیق تأثیر افزودن صمغ‌های گوار و کربوکسی‌متیل سلولز در دو غلظت 25/0 و 5/0 درصد بر کیفیت نان چاپاتی مطالعه شد. براساس نتایج، استفاده از سطوح گوناگون صمغ‌ها ، سبب افزایش میزان رطوبت و خاکستر نمونه‌ها، بهبود ویژگی‌های رئولوژیکی همچون جذب آب، زمان گسترش خمیر، افزایش پایداری خمیر، کاهش درجۀ سست‌شدن خمیر، و افزایش عدد والوریمتری و ویژگی‌های ارگانولپتیکی مانند مزه، رنگ پوسته، قابلیت جویدن، بافت، شکستگی و پارگی پوسته، و همچنین بهبود ویژگی‌هایی چون قابلیت کشش خمیر، عدد نسبت، و کاهش میزان بیاتی نمونه‌ها در مقایسه با نمونه‌های شاهد (فاقد صمغ) گردید و نمونه‌های دارای 5/0 درصد صمغ گوار به‌عنوان بهترین تیمار معرفی شدند.}, keywords_fa = {کربوکسی‌متیل سلولز,گوار,ویژگی‌های ارگانولپتیکی,ویژگی‌های رئولوژیکی,نان چاپاتی}, url = {https://ijbse.ut.ac.ir/article_51288.html}, eprint = {https://ijbse.ut.ac.ir/article_51288_3d37da5b23888dca3b3f1e5bce5b557c.pdf} } @article { author = {Aminifar, Mahnaz and Emam Jome, Zahra}, title = {The effect of accelerated ripening by encapsulated protease and lipase on texture of brined cheese}, journal = {Iranian Journal of Biosystems Engineering}, volume = {45}, number = {1}, pages = {37-43}, year = {2014}, publisher = {دانشگاه تهران}, issn = {2008-4803}, eissn = {2423-7841}, doi = {10.22059/ijbse.2014.51289}, abstract = {In this study, the effect of accelerated ripening with encapsulated protease and lipase on physiochemical properties such as fat and moisture, texture and microstructure of brined cheese was investigated. Addition of lipase increases hardness by reducing fat globules diameter and increasing casein matrix junction. It also decreases brittleness by fat degradation which is responsible for plasticizing effect. The number and the mean diameter of fat globules which were entrapped in casein network were affected by levels of added lipase. Encapsulated protease decreases hardness and brittleness of brined cheese by casein degradation to low molecular weight peptides and amino acids.., . ...,}, keywords = {Accelerated ripening,hardness,brittleness,brined cheese}, title_fa = {اثر رسیدن تسریع‌شده با پروتئاز کپسوله و لیپاز بر بافت پنیر آب‌نمکی}, abstract_fa = {در این مطالعه، اثر رسیدن تسریع‌شده با کمکپروتئاز کپسوله‌شده و لیپازبر ویژگی‌های فیزیکوشیمیایی، بافت، و ریزساختار پنیرهای آب‌نمکی بررسی شده است. اضافه‌کردن لیپاز با کاهش اندازۀ گلبول‌های چربی و افزایش اتصالات کازئین سبب افزایش سختی و نیز با تجزیۀ چربی‌ها که به‌عنوان روان‌ساز عمل می‌کردند، سبب کاهش نیروی لازم برای شکنندگی پنیرهای آب‌نمکی ‌می‌شود. تعداد و قطر گلبول‌های چربی که در ماتریکس کازئینی به دام افتاده‌اند، تحت تأثیر غلظت آنزیم به‌کار‌برده‌شده قرار می‌گیرد. پروتئازهای کپسوله‌شده ‌با افزایش شکست کازئین‌ها به پپتیدهایی با وزن مولکولی پایین و اسیدهای آمینه، سبب کاهش سختی و نیروی لازم برای شکنندگی پنیرهای آب‌نمکی ‌می‌شود.}, keywords_fa = {پنیر آب‌نمکی,رسیدن تسریع‌شده,سختی,شکنندگی}, url = {https://ijbse.ut.ac.ir/article_51289.html}, eprint = {https://ijbse.ut.ac.ir/article_51289_1d2b244792caf2129945b5890cd08dae.pdf} } @article { author = {Ekrami, Mohammad and Emam jomeh, Zahra and Mirzakhani, Marzieh}, title = {Physical and mechanical properties of biodegradable edible film obtained from Salep}, journal = {Iranian Journal of Biosystems Engineering}, volume = {45}, number = {1}, pages = {45-51}, year = {2014}, publisher = {دانشگاه تهران}, issn = {2008-4803}, eissn = {2423-7841}, doi = {10.22059/ijbse.2014.51290}, abstract = {In this study the feasibility of using salep as a new film-forming material was studied. The mechanical properties, water vapor permeability and thickness of salep films incorporated with glycerol were determined. Increasing the content of dry material of salep from 1% to 3%(w/v) increased values for tensile strength and elongation at break from 16.16% and 18.85 MPa to 70.15% and 24.50 MPa respectively. Also values for water vapor permeability, decreased and then increased. Surface and dorsal of Salep edible films studied by Scanning Electron Microscopy to explain structure properties. This study revealed that the salep had a good potential to be used in producing edible films with interesting specifications.}, keywords = {Salep,Edible film,Mechanical properties,water vapor permeability,Scanning Electron Microscopy}, title_fa = {خواص فیزیکی و مکانیکی فیلم زیست‌تخریب‌پذیر خوراکی حاصل از ثعلب}, abstract_fa = {در این مطالعه امکان‌سنجی استفاده از ثعلب به‌عنوان مادۀ جدید تشکیل‌دهندۀ فیلم بررسی شد. خواص مکانیکی، نفوذپذیری به بخار آب و ضخامت فیلم‌های ثعلب حاوی گلیسرول تعیین شدند. با افزایش مقدار مادۀ خشک ثعلب از (w/v)1 درصد به (w/v)3 درصد مقادیر مقاومت کششی و درصد افزایش طول به‌ترتیب از 16/16 درصد و 85/18 مگاپاسکال به 15/70 درصد و 5/24 مگاپاسکال افزایش یافت. همچنین مقادیر نفوذپذیری به بخار آب کاهش و سپس افزایش یافت. سطح و پشت فیلم‌های خوراکی ثعلب با میکروسکوپ الکترونی روبشی برای توضیح خواص ساختاری مطالعه شد. این مطالعه نشان داد که ثعلب پتانسیل خوبی برای استفاده در فیلم‌های خوراکی با ویژگی‌های جالب دارد.}, keywords_fa = {ثعلب,فیلم خوراکی,میکروسکوپ الکترونی روبشی,نفوذپذیری به بخار آب,ویژگی‌های مکانیکی}, url = {https://ijbse.ut.ac.ir/article_51290.html}, eprint = {https://ijbse.ut.ac.ir/article_51290_693eed5aa5475398ce5b51ba8965416a.pdf} } @article { author = {Nafar, Maryam and Emam jomeh, Zahra and Hashemi Ravan, Mahnaz}, title = {Investigation on the effect of ultrasonic process on the inactivation of Saccharomyces cervisie in red grape juice}, journal = {Iranian Journal of Biosystems Engineering}, volume = {45}, number = {1}, pages = {53-59}, year = {2014}, publisher = {دانشگاه تهران}, issn = {2008-4803}, eissn = {2423-7841}, doi = {10.22059/ijbse.2014.51291}, abstract = {Response surface methodology (RSM) was used in order to find the suitable conditions of ultrasonic treatment for achieving the maximum inactivation rate and anthocynins content during ultrasonic processing of red grape juice. Temperature in 3 levels (25 - 37.5 - 50°C), time in (20 – 30 - 40 minutes) and frequency (0 - 67.5 – 135 kHz) were parameters which effects were studied. Experiments were designed according to central composite design with 3 levels including central and axial points for each mentioned parameter. In these experiments 2 mL of solution containing 0.5 MC Farland (OD=0.13) were add to 100 mL of red grape juice. Results showed that linear and quadratic effects of all 3 parameters (temperature, time and frequency) had significant (p<0.05) effect on the inactivation rate and anthocynins content. Analysis of variances was carried out to obtain the regressions for each response and different model inputs. The most suitable conditions were found to be 37.25°C, 20 minutes and 35 kHz.}, keywords = {Inactivation,optimization,Red grape juice,Saccharomyces cervisie,Ultrasonic process}, title_fa = {بررسی اثر فرایند اولتراسو‌ند بر غیر فعال‌سازی مخمر ساکارومیسس سرویزیه در آب انگور قرمز با استفاده از روش سطح پاسخ (RSM)}, abstract_fa = {روش سطح پاسخ به‌منظور تعیین نقاط بهینۀ فرایند فراصوت، برای دستیابی به بیشینۀ میزان انهدام مخمرها و میزان آنتوسیانین کل پس از فراوری با اولترا‌سوند آب انگور قرمز استفاده شد. درجۀ حرارت در سه سطح (C◦ 25، 5/37، 50)، مدت زمان فرایند ( به‌‌دست‌آمده در 20، 30، 40 دقیقه)، فرکانس (0، 5/67، 135 کیلوهرتز) فاکتورهایی بودند که تأثیر آنها بر متغیرهای وابسته طی فرایند فراصوت ارزیابی شد. آزمایش‌ها بر‌اساس طرح مرکب مرکزی با در‌نظر‌گرفتن سه سطح شامل نقاط مرکزی و محوری برای هر یک از فاکتورهای یاد‌شده، انجام گرفت. در آزمایش‌‌ها از محلول حاوی مخمر 5/0 مک‌فارلند (13 /0=OD) مقدار 2 میلی‌لیتر به هر 100 میلی‌لیتر آب انگور اضافه شد. نتایجحاکی از این بود که تأثیرات خطی و درجه‌دوم هر سه متغیر مستقل دما، زمان، و فرکانس بر کاهش میزان فعالیت مخمرها و تغییر میزان آنتوسیانین معنی‌دار بودند (05/0>p). برای هر پاسخ با استفاده از تجزیۀ رگرسیون خطی چندگانه مدل‌‌های چندجمله‌‌ای درجه‌دوم به‌دست آمد. تجزیۀ واریانس (ANOVA) به‌منظور ارزیابی صحت و دقت مدل‌‌ها اجرا شد. مناسب‌ترین شرایط فرایند در دمای ◦C25/37، زمان 20 دقیقه، فرکانس 35 کیلو‌هرتز مشخص شد.}, keywords_fa = {آب انگور قرمز,بهینه‌سازی,غیرفعال‌سازی ساکارومیسس سرویزیه,فرایند فراصوت}, url = {https://ijbse.ut.ac.ir/article_51291.html}, eprint = {https://ijbse.ut.ac.ir/article_51291_db64997444fc61a04260e8bf26eeccf6.pdf} } @article { author = {Nourani, Moloud and Hamdami, Nasser and Nasirpour, Ali}, title = {Modeling of Involved Phenomena in UF White Cheese Ripening after Dry Salting}, journal = {Iranian Journal of Biosystems Engineering}, volume = {45}, number = {1}, pages = {61-72}, year = {2014}, publisher = {دانشگاه تهران}, issn = {2008-4803}, eissn = {2423-7841}, doi = {10.22059/ijbse.2014.51292}, abstract = {Ripening is one of the most important stages in production of cheese. In this research to comprehensive study of UF cheese ripening as the major industrial cheese that is produced in Iran, mass transfer, heat transfer and changes in quality and sensory properties, simultaneously considered and a mathematical model was developed to describe them. Thus, at first, lipolysis, proteolysis, texture and sensory properties indexes of cheese samples were measured, and the appropriate kinetic model to describe changes in these indexes was determined. Then using the heat transfer model and the relationships that obtained between the acid value with flavor, texture with NPN, and taste with general acceptance, a comprehensive mathematical model was developed to describe the non-aligned movement of salt and water using Fick second law, heat transfer using the Fourier second law and changes in quality characteristics as a function of internal and external factors in UF cheese during ripening and salting with MATLAB software. Then Lipolysis, proteolysis, texture and sensory properties indexes and salt, moisture and temperature profiles were predicted. Comparison of the experimental and predicted data showed a high correlation between the values that predicted by the model and experimental values.}, keywords = {Mass Transfer,Heat transfer,lipolysis,Proteolysis,Mathematical model}, title_fa = {مدل‏سازی پدیده های درگیر در رسیدن پنیر سفید تولید‌شده به روش فراپالایش پس از نمک‏پاشی}, abstract_fa = {مرحلۀ رسیدن پنیر از مراحل مهم در تولید آن است. در این تحقیق فرایند رسیدن پنیر سفید تهیه‌شده به روش فراپالایش (UF) عمده‏ترین پنیر صنعتی تولیدی در کشور از نظر انتقال جرم، حرارت، و تغییرات خصوصیات کیفی و ویژگی‏های حسی به‌طور جامع بررسی شده و مدلی ریاضی برای توصیف آنها ارائه شده است. بدین منظور پس از اندازه‏گیری شاخص‏های لیپولیز، پروتئولیز، بافت، و ویژگی‏های حسی، مدل سینتیکی مناسب برای توصیف تغییرات این شاخص‏ها تعیین شد و با مدل انتقال حرارت موجود و با به‌دست‌آوردن رابطۀ عدد اسیدی با طعم و بافت دارای ازت غیرپروتئینی، مدل ریاضی جامعی برای توصیف هم‌زمان این رویدادها شرح و بسط داده شد: انتقال غیر ‏هم‏جهت آب و نمک با قانون دوم فیک، انتقال حرارت با استفاده از قانون دوم فوریه، تغییرات ویژگی‏های کیفی به‌عنوان تابعی از عوامل درونی و بیرونی در حین رسیدگی، و نمک‏زنی با استفاده از نرم‏افزار متلب. به‌کمک روابط مذکور می‌توان تغییرات شاخص‏های لیپولیز، پروتئولیز، بافت، ویژگی‏های حسی، نمک، رطوبت، و دما را پیش‏بینی کرد. مقایسۀ نتایج حاصل از مدل با داده‏های اندازه‏گیری‌شده همبستگی بالای بین این مقادیر را نشان می‌دهد.}, keywords_fa = {انتقال جرم,انتقال حرارت,پروتئولیز,لیپولیز,مدل ریاضی}, url = {https://ijbse.ut.ac.ir/article_51292.html}, eprint = {https://ijbse.ut.ac.ir/article_51292_5e9aaf907b390f77d4947484ad48438f.pdf} } @article { author = {Asadi, Maryam and Hamdami, Nasser and Goli, Sayed Amir Hossein}, title = {Changes in qualitative properties of potato stick during pre-drying and frying}, journal = {Iranian Journal of Biosystems Engineering}, volume = {45}, number = {1}, pages = {73-79}, year = {2014}, publisher = {دانشگاه تهران}, issn = {2008-4803}, eissn = {2423-7841}, doi = {10.22059/ijbse.2014.51293}, abstract = {Due to problems in storage, transport and price fluctuation of fresh potato, production of ready-to-use products like French fries is of particular importance.One of the important steps in product processing is pre-drying.Sticks with 0.8*0.8*8 cm dimensions were prepared, blanched with hot water at 75°C for 10 minutes and dried at four different air temperatures of 50, 60, 70 and 80°C to moisture content of 70٪. Finally, frying at 180°C for 4 minutes was performed. Color and texture were evaluated during pre-drying whereas color, texture and oil uptake of samples were investigated after frying. The results showed that drying temperature was much effective on product texture while no difference was observed on color and oil uptake of potato sticks. The best quality will be obtained with drying at 70°C to moisture content of 75٪.}, keywords = {Color,Texture,Oil uptake,potato}, title_fa = {بررسی تغییرات ویژگی‌های کیفی خلال سیب‌زمینی طی خشک‌کردن مقدماتی و پایان سرخ‌کردن}, abstract_fa = {با توجه به مشکلات نگهداری، حمل‌ونقل، و نوسان فصلی قیمت سیب‌زمینی تازه، تولید فراورده‌های آمادۀ مصرف چون خلال سیب‌زمینی نیمه‌‌سرخ‌‌شده اهمیت ویژه‌ای دارد. کیفیت خلال سیب‌زمینی نیمه‌سرخ‌شده، اغلب برحسب ظاهر، رنگ، طعم، بافت، و میزان جذب روغن سنجیده می‌شود. از مراحل مهم در پیش‌فراوری این محصول، مرحلۀ خشک‌کردن مقدماتی است. این مرحله به‌دلیل ‌آنکه جذب روغن را کاهش می‌دهد و خواص ارگانولپتیک محصول را با افزایش تردی آن بهبود می‌بخشد، شایان ‌توجه است. برای انجام آزمایش‌ها، خلال‌های سیب‌زمینی با ابعاد 8/0×8/0×8 سانتی‌متر تهیه‌شدند و پس از آنزیم‌بری در آب 75 درجۀ ‌سلسیوس به‌مدت 10 دقیقه، با خشک‌کن جریان هوای گرم در‌ دماهای50، 60، 70، و 80 درجۀ ‌‌سلسیوس تا رطوبت 70 درصد بر‌اساس وزن مرطوب خشک‌ گردیدند. در‌پایان، در روغن با دمای 180 درجۀ ‌سلسیوس به‌مدت 4 دقیقه سرخ شدند. خصوصیات کیفی بررسی‌شده در طول دورۀ خشک‌کردن، رنگ و بافت، و در پایان سرخ‌کردن، رنگ، بافت، و میزان روغن باقیمانده بود. نتایج آزمایش‌ها نشان ‌داد که برخلاف رنگ و میزان روغن باقیمانده درخلال، کیفیت بافت آن تحت تأثیر دمای خشک‌کردن است و با خشک‌کردن در دمای 70 درجۀ سلسیوس تا رسیدن به رطوبت 75 درصد براساس وزن مرطوب، بهترین کیفیت حاصل می‌شود.}, keywords_fa = {بافت,جذب روغن,رنگ,سیب‌زمینی}, url = {https://ijbse.ut.ac.ir/article_51293.html}, eprint = {https://ijbse.ut.ac.ir/article_51293_9745f4e4850e9f26f4126a965e1ec7a3.pdf} } @article { author = {Ayati, Sayyed Vahid and Hamdami, Naser}, title = {Effect of Pre-fermentation and Freezing Temperature of Sangak Dough on the Yeast Activity and Sangak Bread Volume}, journal = {Iranian Journal of Biosystems Engineering}, volume = {45}, number = {1}, pages = {81-87}, year = {2014}, publisher = {دانشگاه تهران}, issn = {2008-4803}, eissn = {2423-7841}, doi = {10.22059/ijbse.2014.51294}, abstract = {In this study the impact of freezing rate and degree of pre-fermentation on Sangak frozen dough and its bread was assessed. The pre-fermentation was between zero and 120 min and the corresponding secondly fermentation was between 120 and 0 min, respectively, to obtain total fermentation time of 120 min. The pre-fermentation dough was formed in flat shape and frozen under -20, -25 and -30 °C. It was followed by one day storage at -18 °C. After storage period a second fermentation (in some case there was no second fermentation) was done and in order to finish the fermented dough was baked. Sangak frozen dough quality was assessed by measuring yeast survival and gassing power after thawing. Characteristics of frozen dough bread were evaluated by measuring density after baking. Results showed that viability of yeast initially increased and then decreased by increasing freezing rate, so that at -25 °C the most viability was observed. The maximum yeast viability was observed at short pre-fermentation (30 min). A direct relationship was observed between gassing power and yeast viability. The lowest bread density was obtained with the highest freezing rate and with the short pre-fermentation time.}, keywords = {Bread density,Gassing power,Sangak bread,Yeast viability}, title_fa = {اثر پیش‌تخمیر و دمای انجماد خمیر نان سنگک بر فعالیت مخمر و حجم نان سنگک}, abstract_fa = {تکنولوژی خمیر منجمد از تمهیداتی است که با حداقل تخصص و امکانات، دست‌یابی به نان با‌کیفیت و تازه را امکان‏پذیر می‏سازد. در این تحقیق اثر سرعت انجماد و پیش‌تخمیر بر خصوصیات کیفی خمیر منجمد سنگک و نان حاصل از آن بررسی شد. مرحلۀ پیش‌تخمیر بین صفر تا 120 دقیقه (زمان تخمیر کامل)، با فواصل زمانی 30 دقیقه انجام گرفت و زمان تخمیر نهایی پس از انجماد برابر با تفاوت زمان پیش‌تخمیر و تخمیر کامل درنظر گرفته شد. سپس ورقه‌های خمیر سنگک پیش‌تخمیر‌شده در دماهای 20-، 25-، و 30- درجۀ سلسیوس منجمد شدند. خمیر منجمد سنگک پس از 24 ساعت نگه‏داری در دمای 18- درجۀ سلسیوس یخ‌زدایی شد و پس از طی تخمیر نهایی پخت گردید. بررسی‌های کیفی در قالب اندازه‌گیری درصد مخمر زنده‌مانده و توان تولید گاز مخمر پس از یخ‌زدایی خمیر منجمد و اندازه‌گیری دانسیتۀ نان حاصل صورت گرفت. نتایج نشان داد که زنده‏مانی مخمر با افزایش سرعت انجماد در ابتدا سیر صعودی و سپس سیر نزولی داشته است و بالاترین زنده‏مانی در دمای 25- درجه مشاهده گردید. زمان کوتاه پیش‌تخمیر (30 دقیقه) بالاترین شاخص زنده‏مانی مخمر پس از انجماد را نشان داد. نتایج توان تولید گاز با زنده‏مانی مخمر رابطۀ مستقیمی نشان داد. بررسی کیفیت نان حاصل از خمیر منجمد سنگک نشان داد که با انجام پیش‌تخمیر کوتاه و سرعت انجماد بالا، نانی با دانسیتۀ پایین‏تر به‌دست می‏ آید.}, keywords_fa = {توان تولید گاز,دانسیتۀ نان,زنده‏مانی مخمر,نان سنگک}, url = {https://ijbse.ut.ac.ir/article_51294.html}, eprint = {https://ijbse.ut.ac.ir/article_51294_8075d0ac9c83695b1fdb13dd4d81147b.pdf} } @article { author = {}, title = {English Abstract}, journal = {Iranian Journal of Biosystems Engineering}, volume = {45}, number = {1}, pages = {1-10}, year = {2014}, publisher = {دانشگاه تهران}, issn = {2008-4803}, eissn = {2423-7841}, doi = {10.22059/ijbse.2014.52737}, abstract = {}, keywords = {}, title_fa = {چکیده های انگلیسی}, abstract_fa = {}, keywords_fa = {}, url = {https://ijbse.ut.ac.ir/article_52737.html}, eprint = {https://ijbse.ut.ac.ir/article_52737_3873f0e2e0f51b663c9ce48a6bc965f7.pdf} }