@article { author = {Mashallah kermani, Ali and Hosseini, Seyyed Ahmad and Arabhosseini, Akbar}, title = {Experimental study the effect of dew formation on the performance of solar cells}, journal = {Iranian Journal of Biosystems Engineering}, volume = {49}, number = {1}, pages = {49-59}, year = {2018}, publisher = {دانشگاه تهران}, issn = {2008-4803}, eissn = {2423-7841}, doi = {10.22059/ijbse.2017.236241.664963}, abstract = {The present research examined the study of the laboratory the effects of dew formation and humidity on the parameters mono crystalline and polycrystalline silicon solar panel. To create statuses dew formation equipped test lab device performance solar panel systems to environmental monitoring temperature and relative humidity. were evaluated this study dew formation of air relative humidity of 45, 60 and 75 percent at 25 degrees Celsius temperature on the surface the panel. The results showed that dew formation on the surface of the solar panel increases the performance parameters relative to humid weather conditions. The effects of the type of silicon panel and the relative humidity of ambient were very significant (p <0.01) on almost all functional parameters of the solar panel. By increasing the amount of dew covering on the panel surface, the functional parameters decreased linearly. The effect of temperature on the performance parameters was much higher than the air humidity. In general, the efficiency of a mono-Si solar panel in the conditions of relative humidity in the range of 45% to 75% resulted in 13.74% to 8.43% for mono-Si panel and 11.38% to 8.1% percent for a poly-Si, respectively.}, keywords = {solar panel,relative humidity,dew,Efficiency,Performance}, title_fa = {بررسی اثر رطوبت و شبنم بر عملکرد پنل های خورشیدی در شرایط آزمایشگاهی}, abstract_fa = {این پژوهش به بررسی اثر رطوبت هوا و تشکیل شبنم بر پارامترهای عملکردی دو نوع پنل خورشیدی سیلیکونی  مونوکریستال و پلی­کریستال در شرایط آزمایشگاهی می­پردازد. برای ایجاد شرایط رطوبتی مختلف و تشکیل شبنم دستگاه آزمایشگاهی آزمون عملکرد پنل­های خورشیدی به سامانه کنترل شرایط محیطی دما و رطوبت نسبی تجهیز گردید. دو نوع آزمایش اثر رطوبت نسبی هوا در سه سطح 45، 60 و 75 درصد در دما 25 درجه سلسیوس و اثر تشکیل شبنم ناشی از آن­ها بر روی سطح دو نوع پنل در سه تکرار انجام شد. با توجه به تحلیل تصاویر در نرم­فزار imagJ، مقدار پوشش تشکیل شبنم روی سطح پنل در رطوبت‌های 45، 60 و 75 درصد به ترتیب 19/45%، 5/63% و 62/83% برآورد گردید. با تعیین منحنی­های مشخصه جریان - ولتاژ (I-V) و توان – ولتاژ (P-V) برای شرایط مختلف، پارامترهای عملکردی شامل اختلاف پتانسیل مدار باز (Voc)، شدت جریان اتصال کوتاه (Isc)، توان بیشینه (Pmax)، اختلاف پتانسیل بیشینه (Vmax)، شدت‌ جریان بیشینه (Imax) و راندمان تعیین گردید. نتایج نشان داد که تشکیل شبنم بر روی سطح پنل خورشیدی موجب افزایش پارامترهای عملکردی نسبت به شرایط هوای مرطوب می­شود. اثر نوع پنل سیلیکونی، رطوبت نسبی و نوع شرایط محیطی تقریباً بر کلیه پارامترهای عملکردی پنل خورشیدی بسیار معنی­دار (p < 0.01) بود. با افزایش رطوبت هوا و میزان پوشش شبنم روی سطح پنل پارامترهای عملکردی به طور خطی کاهش یافت. اثر دما بر پارامترهای عملکردی نسبت به اثر رطوبت هوا خیلی بیشتر بود. به طور کلی، راندمان پنل خورشیدی مونوکریستال در شرایط تشکیل شبنم ناشی از رطوبت نسبی در محدوه 45 تا 75 درصد به ترتیب موجب افزایش 74/13 تا 43/8 درصد برای پنل مونوکریستال و 38/11 تا 01/8 درصد برای پنل نوع پلی­کریستال نسبت به شرایط هوای مرطوب گردید.}, keywords_fa = {پنل‌های خورشیدی,رطوبت نسبی,شبنم,راندمان,عملکرد}, url = {https://ijbse.ut.ac.ir/article_65623.html}, eprint = {https://ijbse.ut.ac.ir/article_65623_7e08eb374c8f682ecb8d4cd3dcc69d00.pdf} }