@article { author = {Maleki, MohammadReza and Hosein Minekhati, Hosein and Zareei, Samira}, title = {Design, Development and Evaluation of a Pneumatic Planter for Sunflower and Sugar Beet Intercropping}, journal = {Iranian Journal of Biosystems Engineering}, volume = {51}, number = {2}, pages = {273-283}, year = {2020}, publisher = {دانشگاه تهران}, issn = {2008-4803}, eissn = {2423-7841}, doi = {10.22059/ijbse.2020.291819.665239}, abstract = {One of the main problems in intercropping is the lack of suitable machinery‏. In this research, a new pneumatic punch planter has been developed and evaluated for intercropping of sugar beet and sunflower. The main components of sunflower pneumatic punch planter were chassis, punching unit, and seed transferring unit.‏ A unit of pneumatic planter fabricated by Trashkadeh Company Karaj (Iran) was removed and a unit of punch planter was incorporated on the toolbar instead and intercropping was performed. The experimental tests were carried out in a 4-ha field and the effect of traveling speeds of 3, 4 and 5 km/h on seed holes, seed depth, the number of germinated seeds and yield was evaluated. A completely randomized design at three speeds and three repetitions using Duncan’s Multiple Range Test was utilized for comparison uses. No variations in hole depth was observed at travel speed of 3 km/h; where the maximum germinated seeds were achieved as well as minimum variation in hole distances. The results showed that the use of pneumatic punch planter caused 9.69 and 12.45 percent increase in sugar beet and sunflower yields, respectively.}, keywords = {yield,Hole distance,Hole depth}, title_fa = {طراحی، ساخت و ارزیابی مزرعه‌ای کارنده پنوماتیک کشت مخلوط آفتاب‌گردان و چغندرقند}, abstract_fa = {یکی از مشکلات اصلی در کشت مخلوط، کمبود ماشین آلات مناسب است. در این تحقیق یک کارنده حفره‌ساز پنوماتیکی کشت آفتاب‌گردان جهت بکارگیری در کشت مخلوط با چغندرقند طراحی و ارزیابی شد. کارنده پنوماتیکی حفره ساز آفتاب‌گردان شامل شاسی، واحد حفره‌ساز پنوماتیکی و واحد انتقال بذر می‌باشد. یکی از واحدهای کارنده پنوماتیک ساخت شرکت تراشکده کرج از روی تیرک افزار باز و بجای آن یک واحد کارنده حفره‌ساز پنوماتیکی سوار و کشت مخلوط اجرا شد. آزمایش‌ها در مزرعه‌ای به مساحت 4 هکتار اجرا شد و تاثیر سه سرعت پیشروی 3، 4 و 5 کیلومتر بر ساعت روی شاخص‌های تعیین عملکرد شامل عمق حفره‌ها،  فاصله بین حفره‌ها،  تعداد بوته‌های سبز شده و عملکرد محصول مورد مطالعه قرار گرفت. از طرح کاملاً تصادفی در سه سرعت و سه تکرار با استفاده از آزمون چند دامنه‌ای دانکن برای مقایسه استفاده شد. نتایج نشان داد که در سرعت 3 کیلومتر در ساعت هیچ کاهش عمقی در عمق حفره‌ها مشاهده نشد و بیشترین تعداد بوته‌های سبز شده با کمترین تغییرات در فاصله بین حفره‌ها حاصل شد. نتایج نشان داد که استفاده از کارنده پنوماتیک حفره ساز در کشت مخلوط آفتاب‌گردان و چغندرقند سبب افزایش 69/9 درصد عملکرد چغندرقند و افزایش 45/12 درصد عملکرد آفتاب‌گردان شده است.}, keywords_fa = {عملکرد,فاصله بین حفره‌ها,عمق حفره‌ها}, url = {https://ijbse.ut.ac.ir/article_77050.html}, eprint = {https://ijbse.ut.ac.ir/article_77050_f58cb7e0f355ea18956595c47e16f0e0.pdf} }