University of Tehran Press Iranian Journal of Biosystem Engineering 2008-4803 52 2 2021 06 22 Development of a Mechanical Cleaning Machine for Photovoltaic Arrays Surface Development of a Mechanical Cleaning Machine for Photovoltaic Arrays Surface 287 299 81915 10.22059/ijbse.2020.305431.665319 FA Siavash Kasaeipour Dept of Biosystems Engineering, School of Agriculture, Shahid Bahonar University of Kerman,, Kerman, Iran Mohammadmehdi Maharlooei Dept. of Biosystems Engineering, School of Agriculture, Shahid Bahonar University of Kerman, Kerman, Iran 0000-0001-5750-3168 Hamid Mortezapour Dept. of Biosystems Engineering, School of Agriculture,, Shahid Bahonar University of Kerman, Kerman, Iran Journal Article 2020 07 05 Dust deposition on the photovoltaic (PV) arrays surface may cause physical damages, weakens the sun's radiation, and increases the panel temperature that results in the reduction of the electrical efficiency of the panel. PV array cleaning is engaged with issues such as water and energy consumption, and long operating time. An efficient mechanical cleaner improves the cleaning operations compared to the manual operation. In this study, development of a mechanical cleaning machine for photovoltaic arrays surface was carried out. The machine was evaluated using two factors including: the equivalent speed ratio of the brush to the cleaning platform, and the type of detergent at three levels, respectively. The tests were arranged at completely randomized design with three replications. The results showed that the effect of equivalent speed ratio of the brush to the cleaning platform on dust removal was significant (p < 0.05). Also, the effect of all studied factors on output power was significant (p < 0.05). It was revealed that the cleaning machine can increase the amount of power in each 280-Watt panel by up to 40 Watt and the efficiency up to 4%. Dust deposition on the photovoltaic (PV) arrays surface may cause physical damages, weakens the sun's radiation, and increases the panel temperature that results in the reduction of the electrical efficiency of the panel. PV array cleaning is engaged with issues such as water and energy consumption, and long operating time. An efficient mechanical cleaner improves the cleaning operations compared to the manual operation. In this study, development of a mechanical cleaning machine for photovoltaic arrays surface was carried out. The machine was evaluated using two factors including: the equivalent speed ratio of the brush to the cleaning platform, and the type of detergent at three levels, respectively. The tests were arranged at completely randomized design with three replications. The results showed that the effect of equivalent speed ratio of the brush to the cleaning platform on dust removal was significant (p < 0.05). Also, the effect of all studied factors on output power was significant (p < 0.05). It was revealed that the cleaning machine can increase the amount of power in each 280-Watt panel by up to 40 Watt and the efficiency up to 4%. https://ijbse.ut.ac.ir/article_81915_10eaee736af2bdaa72ca1d3685a48417.pdf