Modeling of high power ultrasound-assisted tea drying process

Document Type : Research Paper

Authors

1 Assistant Professor, Department of Mechanical Engineering of Agricultural Machinery, Faculty of Agriculture, Ilam University

2 Master of Science, Department of Mechanical Engineering of Agricultural Machinery

Abstract

Tea is one of the most important medicinal plants which have a considerable effect on the treatment of cardiovascular disease and cancer. The drying process of tea leaves is carried out by hot air flow which consumes high level energy. The aim of the recent research was to investigate the procedure of high power ultrasound-assisted drying process of tea leaves. Hybrid variety of Chinese tea was used for this target. All pre-drying process experiments were utilized in an ultrasonic bath (70 W and 28 KHz) and four levels of sonicated time (10, 20, 40 and 60 min). Five thin-layer drying models were fitted to the samples moisture ratio. Page model was found as the best to describe the behavior of ultrasound-assisted drying process of tea leaves in accordance with χ2, R2 and RMSE data. The confirmed model in this research is suitable for the simulation of ultrasound-combined drying systems.

Keywords

Main Subjects


Akpinar, E. K. (2006). Mathematical modeling of thin layer drying process under open sun of some aromatic plants. Journal of Food Engineering, 77, 864-870.
Alibas, I. (2007). Microwave, air and combined microwave–air-drying parameters of pumpkin slices. LWT-Food Science and Technology, 40, 1445–1451.
AOAC (1984) Official methods of analysis (15th ed.). Washington, D.C.USAP: Association of Official Analytical Chemist.
Babagoltabar, R. & Yeganeh, R. (2013). The Effect of High Power Ultrasound on the Drying Rate of Apple. In: Proceedings of the 21th National Congress of Food Science and Technology, 29-31 Oct., Shiraz University, Shiraz, Iran.
Botheju, W. S., Amarathunge, K. S. P. & Abeysinghe, I.S.B. (2011). Simulation of Trough Withering of Tea using One Dimensional Heat and Mass Transfer Finite Difference Model. Tropical Agricultural Research, 22 (3), 282–295.
Doymaz, İ. (2007). Air-drying characteristics of tomatoes. Journal of Food Engineering, 78, 1291–1297.
Doymaz, İ. (2012). Evaluation of some thin-layer drying models of persimmon slices (Diospyros kaki L.). Energy Conversion and Management, 56, 199–205.
Erbay, Z. & Icier, F. (2009). Optimization of hot air drying of olive leaves using response surface methodology. Journal of Food Engineering, 91, 533–541.
Fernandes, F. A. N., Jr, F. E. L. & Rodrigues, S. (2008). Ultrasound as pre-treatment for drying of pineapple. Ultrasonics Sonochemistry, 15, 1049-1054.
Fernandes, F. A. N. & Rodrigues, S. (2007). Ultrasound as pre-treatment for drying of fruits: Dehydration of banana. Journal of Food Engineering, 82, 261-267.
Henderson, S. M. & Pabis, S. (1969). Grain drying theory I. Temperature effect on drying coefficient. Journal of Agriculture Engineering Research, 6(3), 169-174.
ISO (2011). Black tea- definition and basic requirement. International Organization for Standardization, NO.3720.
Jambrak, A. R., Mason, T. J., Paniwnyk, L. & Lelas, V. (2007). Accelerated drying of button mushrooms, Brussels sprouts and cauliflower by applying power ultrasound and its rehydration properties. Journal of Food Engineering, 81, 88-97.
Jeni, K., Yapa, M. & Rattanadecho, P. (2010). Design and analysis of the commercialized drier processing using a combined unsymmetrical double-feed microwave and vacuum system (case study: tea leaves. Chemical Engineering and Processing: Process Intensification, 49, 389-395.
Madamba, P. S., Driscollb, R. H. & Buckleb, K. A. (1996). The Thin-layer Drying Characteristics of Garlic Slices. Journal of Food Engineering, 29, 75-97.
Mason, T. J. (1998) Power ultrasound in food processing - the way forward. In W. Povey, T. J. Mason (Ed.), Ultrasound in Food Processing (pp. 104–124). Glasgow, United Kingdom: Blackie Academic and Professional.
Nadee, A., Tirawanichakul, Y. & Tirawanichakul, S. (2011). Microwave and Combined Hot Air/ Infrared Radiation of Pandanus leaf: Drying Kinetic and Specific energy consumption. In: proceedings of TIChE International Conference, 10-11 Nov, Hatyai, Songkhla, Thailand.
Naheed, Z., Razzaq Barech, A., Sajid, M., Alam Khan, N., Hussain, R. (2007). EFFECT OF ROLLING, FERMENTATION AND DRYING ON THE QUALITY OF BLACK TEA. SARHAD Journal of Agriculture, 23, 577-580. 
Wang, C. Y. & Singh, R. P. (1978). Use of variable equilibrium moisture content in modeling rice drying. Transactions of ASAE, p. 78-6505, St. Joseph-MI.
Yagcioglu, A., Degirmancioglu, A. & Cagatay, F. (1999). Drying characteristics of laurel leaves under different conditions. In Proceeding of the 7th International Congress of Agricultural Mechanization Energy, 26–27 May, Faculty of Agriculture, Ҫukurova University, Adana, Turkey, pp. 565–569.
Ӧztekin, S. & Martinov, M. (2007). Medicinal and Aromatic Crops: Harvesting, Drying, and Processing (1th ed.). USA: CRC Press.