Investigation of Numerical Model of the Thawing Process of Egg White by Different Ultrasound Cycles

Document Type : Research Paper

Authors

1 Department of Food Science and Technology, Urmia University

2 Bioprocessing and Biodetection Lab (BBL), Department of Food Science and Technology, University of Tehran, Karaj, Iran

3 Department of Food Science and Technology, Urmia University, Urmia, Iran

Abstract

ABSTRACT: In this study, different ultrasound cycles (0, 25, 50 and 75%) were separately applied to optimize the thawing process of frozen egg whites. Frozen egg white samples with temperatures of -30.0 ± 0.5 °C were placed in an ultrasonic bath at 30 °C with ultrasound frequency of 18 kHz to record temperature changes. The experimental data were modeled using OpenFOAM software coupled with the Dakota tool, by a numerical inverse method. The outputs of the inverse modeling were involved fitted heat transfer coefficient and numerical temperature data. The results showed that the use of ultrasonic waves increased the heat transfer coefficient and reduced the thawing process duration. Increasing the sonication duty cycle increased the heat transfer coefficient and further reduced the thawing time, so that the heat transfer coefficient increased from 105.2 to 128.8 W/m2K in 50% cycle without using ultrasound, and to 126.7 W/m2K in 75% cycle and also process time was reduced from 3280 s in absent of ultrasound to 2473 (s) in 75% cycle with the use of ultrasound. Comparison of the model data with the experimental data indicated that there was a high agreement between them (R2>0.97), which can be used in other similar foods. The inverse modeling method can be widely used to determine heat transfer coefficient by fitting experimental data with numerical ones.

Keywords


Adams, B. M., Bohnhoff, W., Dalbey, K., Eddy, J., Eldred, M., Gay, D. and Swiler, L. P. (2009). DAKOTA: a multilevel parallel object-oriented framework for design optimization, parameter estimation, uncertainty quantification, and sensitivity analysis: version 5.0 user’s manual. Sandia National Laboratories, Technical Report, SAND2010-2183.
Cheng, L., Sun, D.-W., Zhu, Z., and Zhang, Z. (2017). Emerging techniques for assisting and accelerating food freezing processes: A review of recent research progresses. Critical Reviews in Food Science and Nutrition, 57(4), 769-781.
 Cheng, X. f., Zhang, M., and Adhikari, B. (2014). Effects of ultrasound-assisted thawing on the quality of edamames [Glycine max (L.) Merrill] frozen using different freezing methods. Food Science and Biotechnology, 23(4), 1095-1102.
 Delgado, A. E., Zheng, L., and Sun, D. W. (2009). Influence of ultrasound on freezing rate of immersion-frozen apples. Food and Bioprocess Technology, 2.270-263,(3).
Fairbanks, H. V. (1979). Influence of Ultrasound Upon Heat Transfer Systems. Ultrasonics Symposium, 1979, pp. 384-387, doi: 10.1109/ULTSYM.1979.197226.
Fennema, O. R., Powrie, W. D., and Marth, E. H. (1973). Low-Temperature Preservation of Foods and Living Matter. (pp. 150–239). New York: Marcel Dekker, Inc.
Floros, J. D., and Liang, H. (1994). Acoustically assisted diffusion through membranes and biomaterials. Food Technology, 48(12), 79-84.
Franke, K. (2000). A new approach for the numerical calculation of freezing and thawing processes of foods using a modified fictitious heat flow method. Journal of Food Engineering, 44(1), 23-29.
Gambuteanu, C., and Alexe, P. (2015). Comparison of thawing assisted by low-intensity ultrasound on technological properties of pork Longissimus dorsi muscle. Journal of Food Science and Technology, 52(4), 2130-2138.
George, R. (1993). Freezing proceseses used in the food industry. Trends in Food Science and Technology, 4(5), 134-138.
Heffington, S., Glezer, A., & Woodruff, G. (2004). Enhanced boiling heat transfer by submerged ultrasonic vibrations. In: Proceedings on 10th international workshop on thermal investigations of ICs and systems (THERMINIC 2004), pp.24–26. France: Sophia Antipolis, Côte d’Azur.
Homayoonfal, M., Mousavi, S. M., Kiani, H., Askari, G., Khani, M., Bari, M. R., and Alizadeh, M. (2018). The use of an innovative inverse numerical modeling method for the evaluation and parameter estimation of barberry anthocyanins ultrasound assisted extraction. Chemical Engineering and Processing-Process Intensification, 133, 1-11.
Kalichevsky, M. T., Knorr, D., and Lillford, P. J. (1995). Potential food applications of high-pressure effects on ice-water transitions. Trends in Food Science and Technology, 6(8), 253-259.
Kiani, H., and Sun, D.-W. (2017). Numerical simulation of heat transfer and phase change during freezing of potatoes with different shapes at the presence or absence of ultrasound irradiation. Heat and Mass Transfer, 1-10.
Kiani, H., Sun, D.-W., and Zhang, Z. (2012). The effect of ultrasound irradiation on the convective heat transfer rate during immersion cooling of a stationary sphere. Ultrasonics Sonochemistry, 19(6), 1238-1245.
Kiani, H., Sun, D.-W., and Zhang, Z. (2013). Effects of processing parameters on the convective heat transfer rate during ultrasound assisted low temperature immersion treatment of a stationary sphere. Journal of Food Engineering, 115(3), 384-390.
Kiani, H., Zhang, Z., and Sun, D.-W. (2013). Effect of ultrasound irradiation on ice crystal size distribution in frozen agar gel samples. Innovative Food Science and Emerging Technologies, 18, 126-131.
Kiani, H., Zhang, Z., and Sun, D.-W. (2015). Experimental analysis and modeling of ultrasound assisted freezing of potato spheres. Ultrasonics Sonochemistry, 26, 321-331.
Kim, H.-Y., Kim, Y. G., and Kang, B. H. (2003). Enhancement of natural convection and pool boiling heat transfer via ultrasonic vibration. Paper presented at the Heat Transfer Summer Conference.
Kissam, A., Nelson, R., Ngao, J., and Hunter, P. (1982). Water‐thawing of fish using low frequency acoustics. Journal of Food Science, 47(1), 71-75.
Li, X.-X., Sun, P., Jia, J.-Z., Cai, L.-Y., Li, J.-R., and Lv, Y.-F. (2019). Effect of low frequency ultrasound thawing method on the quality characteristics of Peru squid (Dosidicus gigas). Food Science and Technology International, 25(2), 171-181.
Liu, Y., Chen, S., Pu, Y., Muhammad, A. I., Hang, M., Liu, D., and Ye, T. (2019). Ultrasound-assisted thawing of mango pulp: Effect on thawing rate, sensory, and nutritional properties. Food Chemistry, 286, 576-583.
Mason, T. (1998). Power ultrasound in food processing-the way. Ultrasound in Food Processing, 105-126.
Mason, T., Paniwnyk, L., and Lorimer, J. (1996). The uses of ultrasound in food technology. Ultrasonics Sonochemistry, 3(3), S253-S260.
McClements, D. J. (1995). Advances in the application of ultrasound in food analysis and processing. Trends in Food Science and Technology, 6(9), 293-299.
Miles, C., Morley, M., and Rendell, M. (1999). High power ultrasonic thawing of frozen foods. Journal of Food Engineering, 39(2), 151-159.
Pham, Q. T. (2006). Modelling heat and mass transfer in frozen foods: a review. International Journal of Refrigeration, 29(6), 876-888.
Reid, D. (1990). Optimizing the quality of frozen foods: understanding and minimizing the effects of each stage in the production of frozen foods, particularly blanching and frozen storage, can optimize their quality. Food Technology (Chicago), 44, 78–82.
Sahagian, M. E., and Goff, H. D. (1996). Fundamental aspects of the freezing process. Food Science and Technology-New York-Marcel Dekker, 1-50.
Voller, V. R., and Prakash, C. (1987). A fixed grid numerical modelling methodology for convection-diffusion mushy region phase-change problems. International Journal of Heat and Mass Transfer, 30(8), 1709-1719.
Voller, V. R., Swaminathan, C., and Thomas, B. G. (1990). Fixed grid techniques for phase change problems: a review. International Journal for Numerical Methods In Engineering, 30(4), 875-898.
Zhou, D., and Liu, D. (2002). Boiling heat transfer in an acoustic cavitation field. Chinese Journal of Chemical Engineering, 10(5), 625-629.
Zhou, D., Liu, D., Hu, X., and Ma, C. (2002). Effect of acoustic cavitation on boiling heat transfer. Experimental Thermal and Fluid Science, 26(8), 931-938
 
.