Amiriyan, A., Rezaei, A.A., &
Esmailzadeh, E. (2017). Fabrication and evaluation of pressurized metering drum performance (equipped with a mechanical separator) by grease belt.
Iranian Journal of Biosystem Engineering, 48(3), 271-278. (In Farsi)
Bakhtiari, M.R., & Loghavi, M. (2010). Development and evaluation of an innovative garlic clove precision planter. Journal of Agricultural Science and Technology, 11(2),125-136.
Brooks, D., & Church, B. (1987). Drill performance assessment: a changed approach. British Sugar Beet Review, 55(4), 50–51.
Hollewell, W (1992). Drill performance assessments. British Sugar Beet Review, 50(3), 13–15.
Karayel, D., Barut, Z.B., & Özmerzi, A. (2004). Mathematical modelling of vacuum pressure on a precision seeder. Biosystems Engineering, 87(4), 437-444.
Karayel, D., & Ozmerzi, A. (2001). Effect of forward speed and seed spacing uniformity on a precision vacuum metering unit for melon and cucumber seed. Journal of Faculty of Agriculture, 14(2), 63–67.
Kachman, S. D., & Smith, J. A. (1995). Alternate measures of accuracy in plant spacing for planters using single seed metering. Transactions of the ASAE, 38(2), 379–387.
Lan, Y., Kocher, M. F., & Smith, J. A. (1999). Opto-electronic sensor system for laboratory measurement of planter seed spacing with small seeds. Journal of agricultural engineering research, 72(2), 119-127.
Moody, F. H., Hancock, J. H., & Wilkerson, J. B. (2003). Evaluating planter performance-cotton seed placement accuracy. ASAE Paper No. 03 1146; St Joseph; Michigan; USA.
Panning J W; Kocher M F; Smith J A; Kachman S D (2000). Laboratory and field testing of seed spacing uniformity for sugarbeet planters. Applied Engineering in Agriculture,16(1), 7–13.
Sauder, G. A., Dill, K. R., Dunlap, D. L., Sauder, K. P., Sauder, D. A., & Zobrist, J. E. (2003). U.S. Patent No. 6,516,733. Washington, DC: U.S. Patent and Trademark Office.
Shabiri, S.S. 1394. Technical guidance for planting, production and management of lentil seed. Agriculture and Natural Resources Research and Education Center of Zanjan. Retrieved September, 10, 2017, from
http://www.agrilib.ir/book_382.html. (In Farsi)
Singh, R.C., Singh, G., & Saraswat, D.C, (2005). Optimisation of design and operational parameters of a pneumatic seed metering device for planting cottonseed. Biosystems Engineering, 92(4), 429-38.
Yazgi, A., & Degirmencioglu, A. (2007). Optimisation of the seed spacing uniformity performance of a vacuum-type precision seeder using response surface methodology. Biosystems engineering, 97(3), 347-356.
Zhan, Z., Yaoming, L., Jin, C., & Lizhang, X. (2010). Numerical analysis and laboratory testing of seed spacing uniformity performance for vacuum-cylinder precision seeder. Biosystems engineering, 106(4), 344-351.
)
