Aikins, K. A., Ucgul, M., Barr, J. B., Jensen, T. A., Antille, D. L., & Desbiolles, J. M. (2021). Determination of discrete element model parameters for a cohesive soil and validation through narrow point opener performance analysis. Soil and Tillage Research, 213, 105123.
ASABE Standards EP542.)2019). Procedures for using and reporting data obtained with the soil cone penetrometer. ASABE, St. Joseph, MI.
ASABE Standards S313.3. (2013). Soil Cone Penetrometer. ASABE, St. Joseph, MI.
Asaf, Z., Rubinstein, D., & Shmulevich, I. (2007). Determination of discrete element model parameters required for soil tillage. Soil and Tillage Research, 92(1-2), 227-242.
Azimi-Nejadian, H. Karparvarfard, S. H. Naderi-Boldaji, M. & Rahmanian-Koushkaki, H. (2019). Combined finite element and statistical models for predicting force components on a cylindrical mouldboard plough. Biosystems Engineering, 186, 168-181.
Bahrami, M., Naderi-Boldaji, M., Ghanbarian, D., Ucgul, M., & Keller, T. (2020). Simulation of plate sinkage in soil using discrete element modelling: Calibration of model parameters and experimental validation. Soil and Tillage Research, 203, 104700.
Barr, J., Desbiolles, J., Ucgul, M., & Fielke, J. M. (2020). Bentleg furrow opener performance analysis using the discrete element method. Biosystems Engineering, 189, 99-115.
Bravo, E. L., Tijskens, E., Suárez, M. H., Cueto, O. G., & Ramon, H. (2014). Prediction model for non-inversion soil tillage implemented on discrete element method. Computers and Electronics in Agriculture, 106, 120-127.
Coetzee, C. J. (2017). Calibration of the discrete element method. Powder Technology, 310, 104-142.
Cundall, P. A. & Strack, O. D. (1979). A discrete numerical model for granular assemblies. Geotechnique, 29(1), 47-65.
De Pue, J., Di Emidio, G., Flores, R. D. V., Bezuijen, A., & Cornelis, W. M. (2019). Calibration of DEM material parameters to simulate stress-strain behaviour of unsaturated soils during uniaxial compression. Soil and Tillage Research, 194, 104303.
DEM Solutions. (2014). EDEM 2.6 Theory Reference Guide. Edinburgh, United Kingdom.
Hærvig, J., Kleinhans, U., Wieland, C., Spliethoff, H., Jensen, A. L., Sørensen, K., & Condra, T. J. (2017). On the adhesive JKR contact and rolling models for reduced particle stiffness discrete element simulations. Powder Technology, 319, 472-482.
Janda, A. & Ooi, J. Y. (2016). DEM modeling of cone penetration and unconfined compression in cohesive solids. Powder Technology, 293, 60-68.
Jang, G., Lee, S., & Lee, K. J. (2016). Discrete element method for the characterization of soil properties in Plate-Sinkage tests. Journal of Mechanical Science and Technology, 30(6), 2743-2751.
Kanyawi, N & Shahgholi, gh (2018). Simulation of the effect of different vibration angles on the performance of vibrating substrate and soil using discrete element method. Iranian Journal of Biosystem Engineering, 49 (2), 181-194.
Keppler, I., Hudoba, Z., Oldal, I., Csatar, A., & Fenyvesi, L. (2015). Discrete element modeling of vibrating tillage tools. Engineering Computations.
Kešner, A., Chotěborský, R., Linda, M., Hromasová, M., Katinas, E., & Sutanto, H. (2021). Stress distribution on a soil tillage machine frame segment with a chisel shank simulated using discrete element and finite element methods and validate by experiment. Biosystems Engineering, 209, 125-138.
Khairalipour, K. (2020). Discrete element method (DEM) and its application in agricultural soil dynamics, 12th National Congress of Mechanical Biosystems Engineering and Mechanization of Iran, Ahvaz.
Kotrocz, K. Mouazen, A. M. & Kerényi, G. (2016). Numerical simulation of soil–cone penetrometer interaction using discrete element method. Computers and ELectronics in Agriculture, 125, 63-73.
Lin, J. Sun, Y. & Lammers, P. S. (2014). Evaluating model-based relationship of cone index, soil water content and bulk density using dual-sensor penetrometer data. Soil and Tillage Research, 138, 9-16.
Lommen, S., Schott, D., & Lodewijks, G. (2014). DEM speedup: Stiffness effects on behavior of bulk material. Particuology, 12, 107-112.
Mouazen, A. M. & Neményi, M. (1998). A review of the finite element modelling techniques of soil tillage. Mathematics and Computers in Simulation, 48(1), 23-32.
Naderi-Boldaji, M.; Alimardani, R., Sharifi, A. & Tabatabaeifar, A., (2008), Design, construction and evaluation of manual digital intrusion gauge, 5th national congress of agricultural machinery and mechanization engineering, Iranian Congress on Agricultural Machinery and Mechanization Engineering, Ferdowsi University of Mashhad
Naderi-Boldaji, M. Hajian, A. Ghanbarian, D. & Bahrami, M. (2018). Finite element simulation of plate sinkage, confined and semi-confined compression tests: A comparison of the response to yield stress. Soil and Tillage Research, 179, 63-70.
Navid, H., & Mohammadi Baneh, N. (2011). Three-dimensional finite element analysis of wide tillage tools in sandy loam soils. Journal of Mechanical Engineering University of Tabriz, 41 (1), 67-72.
Sadek, M. A. Tekeste, M. & Naderi-Boldaji, M. (2017). Calibration of soil compaction behavior using Discrete Element Method (DEM). In 2017 ASABE Annual International Meeting (p. 1). American Society of Agricultural and Biological Engineers.
Sadek, M. A., & Chen, Y. (2015). Feasibility of using PFC3D to simulate soil flow resulting from a simple soil-engaging tool. Transactions of the ASABE, 58(4), 987-996.
Sadek, M. A., Chen, Y., & Zeng, Z. (2021). Draft force prediction for a high-speed disc implement using discrete element modelling. Biosystems Engineering, 202, 133-141.
Saunders, C., Ucgul, M., & Godwin, R. J. (2021). Discrete element method (DEM) simulation to improve performance of a mouldboard skimmer. Soil and Tillage Research, 205, 104764.
Shahqoli, Gh & Shahi, N. )2010(, Modeling of Soil Interaction and Narrow Blades Using Discrete Elements Method, First National Conference on Mechanization and New Technologies in Agriculture of Ahvaz.
Simons, T. A., Weiler, R., Strege, S., Bensmann, S., Schilling, M., & Kwade, A. (2015). A ring shear tester as calibration experiment for DEM simulations in agitated mixers–a sensitivity study. Procedia Engineering, 102, 741-748.
Smith, W. C. (2014). Modeling of Wheel-Soil Interaction for Small Ground Vehicles Operating on Granular Soil (Doctoral dissertation).
Sudduth, K. A., Hummel, J. W., & Drummond, S. T. (2004). Comparison of the Veris Profiler 3000 to an ASAE-standard penetrometer. Applied Engineering in Agriculture, 20(5), 535.
Syed, Z. Tekeste, M. & Way, T. (2017). Discrete Element Modeling (DEM) of Cone Penetration Testing on Soil With Varying Relative Soil Density. In 2017 ASABE Annual International Meeting (p. 1).
Tamás, K., & Tóth, M. F. (2019). Modeling the soil heterogeneity in the discrete element model of soil-sweep interaction. Particles . 294-304.
Tekeste, M. Z., Way, T. R., Syed, Z., & Schafer, R. L. (2020). Modeling soil-bulldozer blade interaction using the discrete element method (DEM). Journal of Terramechanics, 88, 41-52.
Tsuji, T., Nakagawa, Y., Matsumoto, N., Kadono, Y., Takayama, T., & Tanaka, T. (2012). 3-D DEM simulation of cohesive soil-pushing behavior by bulldozer blade. Journal of Terramechanics, 49(1), 37-47.
Ucgul, M. Fielke, J. M. & Saunders, C. (2014). 3D DEM tillage simulation: Validation of a hysteretic spring (plastic) contact model for a sweep tool operating in a cohesionless soil. Soil and Tillage Research, 144, 220-227.
Ucgul, M., Fielke, J. M., & Saunders, C. (2015). Three-dimensional discrete element modelling (DEM) of tillage: Accounting for soil cohesion and adhesion. Biosystems Engineering, 129, 298-306.
Ucgul, M. Saunders, C. & Fielke, J. M. (2017a). Discrete element modelling of tillage forces and soil movement of a one-third scale mouldboard plough. Biosystems Engineering, 155, 44-54.
Ucgul, M. Saunders, C. & Fielke, J. M. (2017b). Particle and geometry scaling of the hysteretic spring/linear cohesion contact model for discrete element modelling of soil-tool simulation. In 2017 ASABE Annual International Meeting (p. 1). American Society of Agricultural and Biological Engineers. St. Joseph, MI.
Ucgul, M., Saunders, C., & Fielke, J. M. (2017c). Discrete element modelling of top soil burial using a full scale mouldboard plough under field conditions. Biosystems Engineering, 160, 140-153.
Vaz, C. M. Manieri, J. M. De Maria, I. C. & Tuller, M. (2011). Modeling and correction of soil penetration resistance for varying soil water content. Geoderma, 166(1), 92-101.
Walton, O. (2006). (Linearized) Elastic–Plastic Contact Model. DEM Solutions.
Walton, O. R. & Braun, R. L. (1986). Viscosity, granular‐temperature, and stress calculations for shearing assemblies of inelastic, frictional disks. Journal of Rheology, 30(5), 949-980.
Zeng, Z. & Chen, Y. (2019). Simulation of straw movement by discrete element modelling of straw-sweep-soil interaction. Biosystems Engineering, 180, 25-35.
Zeng, Z., Thoms, D., Chen, Y., & Ma, X. (2021). Comparison of soil and corn residue cutting performance o f different discs used for vertical tillage. Scientific Reports, 11(1), 1-10.
Zhang, N., Arroyo, M., Ciantia, M. O., Gens, A., & Butlanska, J. (2019). Standard penetration testing in a virtual calibration chamber. Computers and Geotechnics, 111, 277-289.
)
