طراحی و پیاده سازی سامانه تنظیم کشش الکتروهیدرولیکی برای تراکتور مسی فرگوسن با بکارگیری شیر کنترل الکترونیکی جدید

نوع مقاله : مقاله پژوهشی

نویسنده

گروه مکانیک بیوسیستم، واحد تبریز، دانشگاه آزاد اسلامی، تبریز، ایران

چکیده

در این تحقیق با بکارگیری شیر کنترل الکترونیکی اتصال سه نقطه جدید، سامانه کنترل کشش الکتروهیدرولیکی طراحی، ساخت و بر روی تراکتور MF285 نصب گردید. اجزای سامانه الکتروهیدرولیکی شامل حسگر نیروی کشش، حسگر عمق شخم، PLC، موتور پله ای و درایور آن، شیر کنترل و صفحه نمایشگر می باشد. نتایج آزمایش های کارگاهی نشان داد که عملکرد سامانه در پاسخ به تغییرات پله ای نیروی کشش رضایت بخش بود و موقعیت گاوآهن متناسب با نیروی اندازه گیری شده تغییر داده شد. همچنین در زمان ثابت بودن نیرو، سامانه کنترل کاملا پایدار بود. نتایج مزرعه ای نیز نشان داد که در تمامی تیمارها بین میانگین درصد لغزش چرخ ها و مصرف سوخت دو سامانه اختلاف معنی داری وجود داشت(P<0.05). سامانه الکتروهیدرولیکی در مقایسه با سامانه هیدرومکانیکی در حداکثر سرعت پیشروی و حداکثر نیروی کشش تنظیمی، درصد لغزش و مصرف سوخت را به ترتیب 6/44 درصد و 3/29درصد کاهش داد.

کلیدواژه‌ها

موضوعات


عنوان مقاله [English]

Design and Implementation of Electro-Hydraulic Draft Regulating System For MF 285 Tractors Using A New Hitch Control Valve

نویسنده [English]

  • norooz moradinejad
Department of Mechanic of Biosystem, Tabriz Branch, Islamic Azad University, Tabriz, Iran.
چکیده [English]

In this research an electro- hydraulic system was designed, constructed and installed on the Massey Ferguson (MF) 285 tractor by using a new hitch control valve. The electro- hydraulic system consisted of a tensile load cell, a potentiometer, a PLC, stepper motor with driver, hitch control valve and a Programmable Terminal.
The experiment results showed that the performance of the electro-hydraulic control system was satisfactory in response to the draft force variations and the position of plow was altered proportional with the draft force. Also the control system was stable when the draft force was kept in the constant value. The field results showed significant difference between two control systems in fuel consumption and wheel slip (P<0.05). The electro- hydraulic draft control system decreased the fuel consumption and slippage by 44.6% and 29.3% respectively at the maximum draft set value and ground speed, compared to the mechanical draft control system.

کلیدواژه‌ها [English]

  • Tractor
  • Electro-hydraulic draft control
  • Tractive efficiency
  • Slippage
  • Fuel consumption
Anthonis, J., Mouazen, A.M., Saeys, W., & Ramon, H. 2004. An Automatic Depth Control System for on-line Measurement of Spatial Variation in Soil Compaction: Part 3. Design of Depth Control System, Biosystems Engineering, 89(1), 59-67.
Chancellor, W., & Zhang, N. 1989. Automatic wheel-slip control for tractors. Transaction of  ASAE, 32(1), 17-22.
Cowell, P. A., & Milne, M. J. 1999. An implement control system using pure draught sensing and modified linkage geometry. Journal of Agricultural Engineering Research, 22, 353–371.
Damanauskas, V., & Janulevicˇius, A. 2015. Differences in tractor performance parameters between single-wheel 4WD and dual-wheel 2WD driving systems. Journal of Terramechanics, 60, 63–73.
Fakhraei, O; & Karparvarfard, S.H. 2008. Development of a General Equation For Estimation of  Tractive Efficiency by Dimensional Analysis. Tarim Makinalari Bilim Dergisi(Journal of Agricultural Machinery Science), 4(1), 19-26.
Ismail, S. M., Singh, G., & Gee-Clough, D. 1983. Comparison of the field performance of three implements control systems for a tractor. Journal of  Agricultural Engineering Research, 28 (6), 521– 536.
Jablonicky, J., Machal, P., Žikla, A., Kosiba, J., Hujo, L., & Vladislav, H. 2014. Comparing the Hydraulic Control of Tractor Three-point Hitch. Acta Universitatis Agriculturae et Silviculturae endelianae Brunensis,62(5), 939–944.
Karimi Inchebron, S., Mousavi Seyedi, R., & Tabatabaekoloor, R. 2012. Performance evaluation of a light tractor during plowing at different levels of depth and soil moisture content. International Research Journal of Applied and Basic Sciences, 3 (3), 626-631.
Kolator, B. 1999. Mechatronic control of the implement linkage of agricultural tractors. Retrieved from http:// www. Pan-ol.lublin.
Kovacev, I., Kosutic, S., Jejcic, V., Copec, K., Gospodaric, Z., Pliestic, S. 2008. Impact of Electronic-Hydraulic Hitch Control on Rational Exploitation of Tractor in Ploughing. Strojarstvo, 50(5), 287-294.
Lee, J., Yamazaki, M., Oida, A., Nakashima, H., & Shimizu, H. 1998. Electro-hydraulic tillage depth control system for rotary implements mounted on agricultural tractor - design and response experiments of control system. Journal of Terramechanics, 35(4), 229–238.
Moradasgharloo, N. 2015. Design, Development and evaluation of Electronic control valve for hydraulic pump of MF 285 Tractor. Journal of Biosystem Engineering, accepted(In Farsi).
Morselli, R., Zanasi, R., & Ferracin, P. 2006.Dynamic Model of an Electro-hydraulic Three Point Hitch. In Proc. Conf.American Control Conference. Minneapolis:IEEE.DOI:.Oksanen, T. 2007. Control Design Of  Hydraulic Actuators In Agricultural Tractor Using Rapid Control Prototyping. In Proc. 2nd IFAC Intl. Conf. AgriControl(pp. 121-125). Osijek, Croatia.
Osinenko, P.V., Geissler, M., Herlitzius, T. 2015. A method of optimal traction control for farm tractors with feedback of drive torque. Biosystems Engineering, 29, 20–33.
Pranav, P. K., Tewari, V. K., Pandey,  K. P.,  & Jha, K. R. 2012.  Automatic wheel slip control system in field operations for 2WD tractors. Computer and Electronics in Agriculture, 84, 1–6.
Ranjbarian, S., Askari, M., & Jannatkhah, J . 2015. Performance of tractor and tillage implements in clay soil. Journal of the Saudi Society of Agricultural Sciences, http://dx.doi.org/10.1016/j.jssas.2015.05.003
Regional Network for Agricultural Machinery(RNAM). 1983. RNAM test codes and procedures of farm machinery. Technical Series No. 12. Bangkok Thailand. 291 p.
Saeys, W., Mouazen, A. M., Anthonis, J., & Ramon, H. 2004. An automatic depth control system for on-line measurement of spatial variation in soil compaction, part 2: modelling of the depth control. Biosystems Engineering, 89 (3), 267–280.
Saeys, W., Engelen, K., Ramon, H., & Anthonis, J. 2007. An automatic depth control systems for shallow manure injection, part 1: modelling of the depth control system. Biosystems Engieering, 98, 146–154.
Saeys, W., Wallays, C., Engelen, K., Ramon, H., & Anthonis, J. 2008. An automatic depth control systems for shallow slurry injection, part 2: control design and field validation. Biosystems Engineering, 99, 161–170.
Scarlett,  A. J. 1993. Integration of tractor engine, transmission and implement depth controls: part 2, control systems. Journal of Agricultural Engineering Research, 54, 89–112.
Scarlett,  A. J. 2001. Integrated control of agricultural tractors and implements: a review of potential opportunities relating to cultivation and crop establishment machinery. Computer and Electronics in  Agriculture, 7, 269–284.
Schuber, W. L., & Orbach, A. 2000. Control system for a hitched or trailed implement. U.S. Patent No. 6105679.
Soltani, A. & Loghavi, M. 2007. The effect of axle load and draft load on fuel consumption and tractive efficiency of two tractors with 4- bottom plow in tillage operation. Environment and Agricultural Science, 40(1): 125-135(in Farsi).
Wiegard, G. K., & Hanks, T. W. 1985. Vehicle with control system having operator-actuable switch for storing parameter signal value to control vehicle- connected implement raising and lowering structure. U.S. Patent No. 4508176.
Yule, I. J., Kohnen, G., & Nowak, M. 1999. A tractor performance monitor with DGPS capability.Computer and Electronics in  Agriculture, 23, 155–174.